HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

Appendix D 251

Backdating Your System

Finishing Up

where nn is the DTC number.

2. Purge groups.

:PURGEGROUP USL

:PURGEGROUP UXL

:PURGEGROUP UNL

3. Start data communications.

If you have NS 3000/iX conﬁgured, bring up the conﬁgured network interfaces. For

more information, refer to the HP 3000/iX Network Planning, and Conﬁguration

Guide.

NOTE

Use the same names for the network interfaces that were used in your

conﬁguration.

• For example, if you have conﬁgured network interfaces with the names LOOP and

LAN1, enter:

:NETCONTROL START;NET=LOOP

:NETCONTROL START;NET=LAN1

:NSCONTROL START

:STREAM JFTPSTRT.ARPA.SYS

• If you have conﬁgured only the router network interface with the name ROUTER1,

enter:

:NETCONTROL START;NET=ROUTER1

:NSCONTROL START

:STREAM JFTPSTRT.ARPA.SYS

Record the Backdate

The system is ready for normal production. Record the modiﬁcation in the system logbook,

noting the date and release to which you have modiﬁed the system. If you added

subsystem products, note them in the log book including the release they are on.

If you need to add patches, contact your Response Center.