HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
46 Chapter2
Task Checklists
Checklist K. Install a New System
— 5.5 Configuring the System
— 5.6 Checking Volumes
— 5.7 Creating the CSLT using AUTOINST—
Select option 3 FOS, SUBSYS,
PowerPatch if you have a PowerPatch tape, or if no PowerPatch, select
option 4 FOS and SUBSYS.
— 5.13 Applying the CSLT Modification
— 5.14 Restarting the System
— 5.15 Rerunning AUTOINST—
Required only if applying PowerPatch.
Chapter 6 , “Finishing the Process.”
— 6.1 Configuring Datacomm and UPS
— 6.4 Setting Passwords, Lockwords, and UDCs
— 6.5 Configuring Manually Installed Products
— 6.6 Setting Up the TAR Utility
— 6.7 Performing the Final Reboot
— 6.8 Restarting Selected System Functions
— 6.9 Backing Up Your System
— 6.11 Finishing Up
Checklist K tasks completed.
If you have Reactive patches to apply, proceed to one of these checklists:
• Checklist A, “Manage Patches”
• Checklist B, “Manage Patches by Staging Area”
Record system change:
System name:
System type:
Date change made:
Change performed by:
OS version from:
OS version to:
Comments: