HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)

Appendix H 443
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
Action Contact your Hewlett-Packard Response Center for
assistance.
1184 Message Found no cause/action text corresponding to “
name ”.
(STAGEMAN 1184)
Cause STAGEMAN expected to find cause/action text for the
error number given with ERRMSG, but no corresponding
text exists in the catalog.
Action Please report this problem to your Hewlett-Packard
Response Center.
Message 1185-1302 not used.
1303 Message Invalid parameter length. (STAGEMAN 1303)
Cause The length of the parameter exceeds the maximum
expected length.
Action Use a parameter with a shorter length.
1304 Message Command history stack is empty. (STAGEMAN 1304)
Cause There were no previous commands in the current run of
STAGEMAN, so a DO or REDO command is meaningless.
Action None
1305 Message Command not found in command history stack.
(STAGEMAN 1305)
Cause There was no previous command in the current run of
STAGEMAN which matches the command the user has
selected to DO or REDO.
Action None
1306 Message 1306 not used.
1307 Message Unrecognized command. (STAGEMAN 1307)
Cause STAGEMAN does not recognize this as a valid command.
Action Check your spelling on the command.
1308 Message This command is not yet supported. (STAGEMAN
1308)
Cause The user has selected a command which is not supported
in this version of STAGEMAN, and therefore cannot be
executed.
Action None
1309 Message This command has no associated functionality.
(STAGEMAN 1309)
Cause The user has selected a command which should be valid,
but is not internally recognized by STAGEMAN. This
signifies a problem with the STAGEMAN utility.