HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
Appendix H 435
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
1106 Message Found a bad file disposition value for file “
name
”.
(STAGEMAN 1106)
Cause STAGEMAN found an unexpected file disposition value
for the file (the file disposition should be ADD, REPLACE,
or DELETE). This indicates a problem with the HP
Stage/iX facility, and should be reported to
Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for
assistance.
1107 Message Found a bad error action value for file “
name
”.
(STAGEMAN 1107)
Cause STAGEMAN found an unexpected file error action value
for the file (the error action should be WARN or IGNORE).
This indicates a problem with the HP Stage/iX facility, and
should be reported to Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for
assistance.
1108 Message Failed to open file “
name
” in
the staging area. (STAGEMAN 1108)
Cause STAGEMAN received a bad status from the HPFOPEN
intrinsic during an attempt to open the file. There should
be a file system error message associated with this one
that explains why.
Action Determine why the file could not be opened, correct the
problem, then re-execute the command.
1109 Message Could not find file “
name
” in
the staging area. (STAGEMAN 1109)
Cause STAGEMAN expected the file to exist but could not find it.
Action Determine why the file does not exist, correct the problem,
then re-execute the command.
1110 Message Failed to open file “
name
” in
the staging area for purging. (STAGEMAN 1110)
Cause STAGEMAN received a bad status from the HPFOPEN
intrinsic during an attempt to open the file. There should
be a file system error message associated with this one
that explains why.
Action Determine why the file could not be opened, correct the
problem, then re-execute the command.
1111 Message Failed to purge file “
name
”
in the staging area. (STAGEMAN 1111)
Cause STAGEMAN received a bad status from the FCLOSE
intrinsic while attempting the purge the file from the