HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
430 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
Action None
1080 Message Indirect file “
name
” does not exist.
(STAGEMAN 1080)
Cause The ;EXCEPT parameter was used on a DUPLICATE
command, however the indirect file specified for the
parameter does not exist.
Action Check your spelling on the indirect file name.
1081 Message Unable to open indirect file “
name
”.
(STAGEMAN 1081)
Cause The ;EXCEPT parameter was used on a DUPLICATE
command, and STAGEMAN received a file system error
from an HPFOPEN intrinsic call to open the indirect file.
Action Determine why the HPFOPEN intrinsic call failed, correct
the problem, and re-execute the command.
1082 Message Unable to obtain information about indirect file
“
name
” (STAGEMAN 1082)
Cause The ;EXCEPT parameter was used on a DUPLICATE
command, and STAGEMAN received a file system error
from an FFILEINFO intrinsic call for indirect file.
Action Determine why the FFILEINFO intrinsic call failed.
Contact your Hewlett-Packard Response Center for
assistance if necessary.
1083 Message Record size for indirect file “
name
”
exceeds max () (STAGEMAN 1083)
Cause The ;EXCEPT parameter was used on a DUPLICATE
command, however the record size of the indirect file
specified exceeds the limit of 256 bytes.
Action Use an indirect file that has a record size of <= 256 bytes.
1084 Message File “
name
” has a disposition
of DELETE, but a version of the file exists in the staging area.
(STAGEMAN 1084)
Cause The file was staged with a disposition of DELETE
(meaning the file should be deleted from its natural
location when the staging area is activated), but a version
of the file exists in the staging area.
Action Purge the file from the staging area's directory
(/SYS/hpstage/stage_name/). If the file should not have a
disposition of DELETE, then re-stage the file (do an
Expert Mode HELP on STAGEFILE for more information)
with a different disposition.
1085 Message Duplicate failed. Deleted incomplete staging area
“
name
”. (STAGEMAN 1085)