HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)

410 AppendixH
Error Messages and Warnings
Warning Messages (INSTWARN)
Action No corrective action is required.
8 Message Unable to close CD-ROM volume volume name
(INSTWARN #8)
Cause VSCLOSE failed on a mounted CD-ROM volume.
Action • From the console, manually VSCLOSE and dismount
the volume. If the drive is a SCSI drive, run AVRSCSI
to dismount the volume.
• Follow the instructions on the screen to continue with
the installation.
9 Message The installer cannot verify that the second
CD-ROM
volume, volume name, is mounted on LDEV ldev.
(INSTWARN #9)
Cause The user pressed [[return]] at the continue prompt before
the second CD-ROM volume was mounted.
Action • Follow the instructions on the screen and ensure the
second volume has been mounted before pressing
[[return]] again to continue.
• Use DSTAT to verify that the second CD-ROM is
mounted.
10 Message HPINSTAL is terminating on user's request.
(INSTWARN #10)
Cause The user entered QUIT at the prompt to continue after
switching the CD-ROM volumes.
Action • Mount the first CD-ROM volume again and restart
HPINSTAL.
• HPINSTAL may be started again from the beginning or
the current process may be resumed at the point of
creating the CSLT.
11 Message Could not restructure PATCHAUD (INSTWARN #11)
Cause FCOPY of PATCHAUD to a fixed record format file failed.
Action If it is necessary to convert the PATCHAUD file to fixed,
ASCII then use the following commands:
: FILE PAUD;REC=-80,,F,ASCII
: FCOPY FROM=PATCHAUD;TO= PAUD;NEW;SUBSET Reply Y
: PURGE PATCHAUD
: RENAME PAUD,PATCHAUD
Message 12-19 Not used
20 Message Nonexistent product number. (INSTWARN #20)
Cause A bad product number was entered.