HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A

Appendix H 361
Error Messages and Warnings
Installer Error Messages (INSTERR)
• Contact the Response Center if further assistance is
required.
74 Message CLEANXL of TEMPNL failed in patching the OS SOM.
(INSTERR #74)
Cause The installer called the link editor to perform a CLEANXL
on TEMPNL.INSTALL in preparation for replacing the
OS SOM with a patched OS SOM.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from link editor.
• Check error message cause and action in the HP Link
Editor/iX Reference Manual.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
75 Message Re-building NL.INSTALL.SYS failed when patching
the
OS SOM. (INSTERR #75)
Cause The installer called the link editor to perform a BUILDXL
of NL.INSTALL in preparation for replacing the OS SOM
with a patched OS SOM.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from link editor.
• Check error message cause and action in the HP Link
Editor/iX Reference Manual.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
76 Message COPYXL of the OS SOM patch to NL.INSTALL failed.
(INSTERR #76)
Cause The installer called the link editor to perform a COPYXL
of the patched OS SOM to NL.INSTALL.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from link editor.
• Check error message cause and action in the HP Link
Editor/iX Reference Manual.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.