HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
178 AppendixB
Configuration Tables
All HP 3000 Model 9x8LX and 9x8RX systems use only one configuration.
For an HP 3000 Model 9x7LX or RX system, choose a configuration depending on the
number of disks on your system. Table lists each configuration name and the number of
disks.
Table contains configuration recommendations with NS 3000/iX and DTS.
Model 996 CONFG995 -- ALINK995
Model 997 CONFG997 -- ALINK997
Model 9x7LX or RX CONF9x7
n
-- --
Model 9x8LX or RX CONFG9x8 -- --
Model 9x9KS CONFG9x9 -- --
Model 9x9KS with
HP-PB I/O bus
converter A3699A
CONFK9x9 -- --
Table B-2. Configname
Configname Hardware
CONF9X71 One disk
CONF9X72 Two disks
CONF9X73 Three disks
CONF9X74 Four disks
CONF9X75 Three disks and two DDS devices
CONFF9X7 4 FW-SCSI disks
CONFGHPn Reserved for HP use
Table B-3. Physical Path Values
System DTSLINK\Phys. Path SYSLINK\Phys. Path
Model 920
a
4.3 4.3 4.3 4.3
Model 922 LX/RX/922 4.3 4.3 4.3 4.3
Model 925LX/925 4.3 4.2 4.4 4.3
EXPANDED Model 925 4.3 4.2 8.2 8.2
Model 930 8.2 16.2
Table B-1. Configname
System SCSI Group HP-IB Group HP-FL (Alink)
Group