HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)
644 AppendixK
SNA DHCF with VPLUS Applications
SNA DHCF and VPLUS Utilities
SNA DHCF and VPLUS Utilities
Besides FORMSPEC, SNA DHCF affects certain other applications of the VPLUS-based
forms management system as explained in the following sections.
ENTRY
ENTRY can run on an IBM 3270 if you have compiled the forms file for the IBM 3270. Initial
prompts are in TTY-mode and the remaining prompts use standard VPLUS.
REFSPEC
REFSPEC cannot run on an IBM 3270 display station because it uses both VPLUS and file
system intrinsics for terminal I/O.
REFORMAT
REFORMAT is a TTY-mode application and should run without modifications on an IBM
3270 display station.
HP32209B and HP32209S Utilities
The version identification utilities, HP32209B and HP32209S, are TTY-mode applications
and should run without modifications on an IBM 3270 display station. The utilities check
for SNA DHCF on MPE/XL systems. The following example shows the MPE response
when you run utility HP32209B if SNA DHCF is installed on the system.
:RUN HP32209B.PUB.SYS
VPLUS INTRINSICS VERSION: HP32209B.05.15
------- --------------
SEGMENT VERSION
------- --------------
01 B'05'12'SO1'00
02 B'05'12'SO2'00
03 B'05'12'SO3'00
04 B'05'12'SO4'00
05 B'05'12'SO5'00
06 B'05'12'SO6'00
07 B'05'12'SO7'00
08 B'05'12'SO8'00
09 B'05'12'SO9'00
10 B'05'12'S10'00
11 B'05'12'S11'00
12 B'05'12'S12'00
13 B'05'12'S13'00
14 B'05'12'S14'00
------ ---------------
DHCF A0005005
END OF PROGRAM
: