HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

Appendix K 635
SNA DHCF with VPLUS Applications
IBM 3270 Differences and Limitations
IBM 3270 Differences and Limitations
When using VPLUS to design or modify applications for IBM 3270 users, it is important to
understand the limitations that restrict forms design for IBM 3270 display stations. The
information in the following sections explain how an IBM 3270 differs from an HP 3000
terminal and the impact of these differences when running VPLUS applications using
SNA DHCF.
Keyboard Differences
Table K-1 compares HP 3000 terminal keys with equivalent IBM 3270 keys.
Table K-1. Comparison of Major Keys
HP 3000 Key Equivalent IBM 3270 Key and Explanation
AIDS No equivalent key exists.
BREAK PA1 - Equivalent to a system break. A VPLUS application can disable this
key. If disabled, SNA DHCF ignores the key when pressed and re-enables the
keyboard.
CLEAR DISPLAY CLEAR - Functions as a refresh key by clearing the entire screen, including
data and the form itself. Consequently, this key is not a local function, like the
equivalent HP key.
CLEAR LINE ERASE EOF - Clears data in an unprotected field from the cursor to the end of
the field, regardless of the number of lines in the field. This differs slightly
from CLEAR LINE, which performs the same function only if the field does not
exceed one line.
CTRL No equivalent key exists.
CTRLY PA2 - Equivalent to a subsystem break. A VPLUS application can disable this
key. If disabled, SNA DHCF ignores the key when pressed and re-enables the
keyboard.
DEL LINE No equivalent key exists.
ENTER ENTER - Locks the keyboard and transmits all modified data. The cursor
remains in the same position.
ESC No equivalent key exists.
INS LINE No equivalent key exists.
MODES No equivalent key exists.
NEXT PAGE No equivalent key exists.
PREV PAGE No equivalent key exists.
RESET RESET - Unlocks a locked keyboard.
ROLL DOWN No equivalent key exists.