HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

600 AppendixG
TERMINAL INFORMATION
THE HP 264X TERMINALS
HP 2644A Terminal
This terminal must be placed in block mode. When the terminal is opened by FORMSPEC,
ENTRY, REFSPEC, or an application, a message is displayed asking you to press the block
mode key. Also, when the terminal is closed, a message reminds you to unlatch the block
mode key. The HP 26 44A must be strapped as follows to use VPLUS:
Strapping the terminal in this manner allows BLOCK MODE/PAGE operation.
Switch Setting
A closed
B ------
C closed
D open
E ------
F ------
G open
H closed