HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

526 AppendixB
VPLUS Error Messages
VPLUS Intrinsic Error Messages
VOPENBATCH and VCLOSEBATCH Messages
Access Method Messages
Error Message Cause/Action
070
Forms file was re-complied
since last using this batch.
You may want to specify a different batch file
name since the forms file has been changed
since the specified batch file was last used
with the forms file.
071
A forms file must be opened
before opening a batch file.
Call VOPENFORMF before calling VOPENBATCH
072
The file does not appear to be
an existing batch file.
Check the batch file name you specified; if this
is a new file, it will be created automatically
and then opened.
073
A different forms file created
this batch.
You opened a forms file that is not the forms
file associated with the batch files specified.
See 070.
074
Batch file not yet opened.
080
Batch file open failed
(FSERR !)
Refer to the file system error to determine the
cause of the open failure. Check file name.
081
Can’t read the batch file’s
user label (FSERR !)
FREADLABEL intrinsic failed.
082
Internal error: Batch file
FGETINFO failed. (FSERR !)
FGETINFO intrinsic failed.
084
Can’t write user label to batch
file (FSERR !)
FWRITELABEL intrinsic failed.
085
Internal error: Batch file
close failed. (FSERR !)
FCLOSEBATCH intrinsic failed. Refer to the file
system error to determine the cause of the
close failure.
Error Message Cause/Action
086
Access method: file code error.
087
Access method: Attempt to add a
duplicate key.
088
Access method: Internal error.
Key insertion location error.
089
Access method: Internal error.
Block not present.
090
Access method: Attempt to open
an old file as new.
091
Access method: Internal error.
Key block buffer error.