HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

496 AppendixB
VPLUS Error Messages
FORMSPEC Error Messages
Menu Processing Utility Messages
Menu Init and Processing Messages
Error Message Cause/Action
601
Must be B, H, I, U, 1-8, in any
combination, or NONE.
Enhancement code is incorrect; check and
correct.
604
The name cannot have embedded
blanks.
A field or form name has embedded blank;
delete blank or use underline (_).
605
The form name must be unique for
this forms file.
Form name duplicates another form name in
file; make name unique.
606
Must be NUMn, DIG, IMPn, MDY,
DMY, YMD, or CHAR.
Data type incorrect; use one of the listed codes
- n indicates number of decimal positions.
608
Must be 0 (optional), R
(required), P (process) or D
(display only).
Field type incorrect; use one of the listed
codes.
609
Internal error: Global allocate
failed.
610
Error writing globals buffer.
File full? (FSERR!!!!)
See error 123.
611
For a NUMn data type, n must be a
digit.
Use digit (0-9) after NUM data type to
indicate number of decimal positions.
612
For the IMPn data type, n is
required.
You must specify the number of implied
decimal places in an IMP type field.
613
The name cannot be a reserved
word.
Refer to the list of the FORMSPEC reserved
words.
615
Color pair value must be between
1 and 8.
Error Message Cause/Action
701
The name cannot be blank.
The form name must be specified on FORM
menu.
702
The next form name cannot be
blank.
Specify a particular next form name, or
$HEAD, $END, $RETURN, or $REFRESH.
703
Error trying to open the forms
file. (FSERR!!!!)
Refer to the File System Error number for the
cause of the open failure. Check form name.
Do not use the key file if the form file is old.
704
The window line must be a number
between 0 and 24, inclusive.
Correct window specification on GLOBALS
menu.