HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)
Chapter 3 121
INTRODUCTION TO FORMS DESIGN
DATA CAPTURE DEVICE SPECIFICATIONS MENU
DATA CAPTURE DEVICE SPECIFICATIONS MENU
If you select the data capture devices on the Terminal/Language Selection Menu, the
following message will appear at the bottom of the Globals Menu:
Press NEXT to select HP 3075/6 device specifications
Press NEXT to display the Data Capture (3075/6) Device Specifications Menu, as shown in
Figure 3-32. On this menu you can specify how you want messages longer than 24 (or 32
for the HP 3081A) characters to be presented on single line display. In addition, you can
specify which keyboard light is to be lit if an error is detected, and the device configuration
for the Multifunction and Bar code readers if they were specified as valid input devices.
Figure 3-32. Data Capture Device Specifications Menu
Fields
Split Message Pause (seconds) You may specify the number of seconds between
screen presentations for messages longer than 24 (or 32) characters. Enter
a value between 1 and 99 in this box and a NO in the Wait for ENTER box.
User and VPLUS's messages will be broken so as not to display part of a
word. This field does not apply to Mini-CRT display.
Default 3 (seconds)
PREV
FORM
NEXT
FORM
REFRESH
PREV NEXT MAIN/
RESUME
EXIT
FORMSPEC v.uu.ff 3075/6 Device Specifications FORMS FILE: filename
[
3
]
Split Message Pause (seconds)
[
NO
]
[
E
]
[
HOLES
]
[
NONE
]
[
YES
]
OR Wait for user to press ENTER
Error Light
HOLES/MARKS
Corner Cut Required
Clock On/After/NONE
[
UPC
]
Format
Disable Check Digit
[
N
]
Multifunction Reader:
Barcode Reader: