HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

120 Chapter3
INTRODUCTION TO FORMS DESIGN
TERMINAL/LANGUAGE SELECTION MENU
HP262X, HP239X Families Specify an X for HP 262X and HP 239X
terminals; includes HP 150 terminals.
HP3075A, HP3076A, HP3081A Specify an X in the HP 3075A, HP 3076A,
HP 3081A box in order for the forms file to run on the data
capture devices; specify an 8 to run on the data capture
devices and take full advantage of the HP 3081A.
HP2627A, HP2397A Specify anX for terminals with the color feature; you
must also specify an X in the HP262X, HP239X Families
field.
If you want the forms file to run on the HP 264X and HP 262X/HP 239X
families, you must specify both on the Terminal/Language Selection Menu.
Enter Language ID:
Specify the following:
FORMSPEC Language Only 0 for NATIVE-3000 is supported.
Forms File Language Specify one of the following:
0 for NATIVE-3000
the native language ID number for a language-dependent
forms file or
-1 for an international forms file. Refer to Section 8 for
more information.
Default 0 for NATIVE-3000