HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

Chapter 3 119

INTRODUCTION TO FORMS DESIGN

TERMINAL/LANGUAGE SELECTION MENU

The Terminal/Language Selection Menu allows you to specify which terminals will be used

with the forms ﬁle. You may select one family or any combination of families, including all

four families (HP 264X, HP 262X, HP 239X (includes HP 150), and HP 307X). The HP

264X family is the terminal default value. When the selection is defaulted, the forms ﬁle

will run on the HP 264X family, the HP 262X/HP 239X family and the HP 150, but the

following features of selected terminals will not be supported: color, local edits, function

key labeling on HP 264X terminals, and security display enhancement. Consult Appendix

G to see which HP terminals support which features. The family of terminals need not be

speciﬁed unless the forms ﬁle will be making use of these terminal features or will be used

with the data capture devices. Refer to the ﬁeld descriptions below for more information.

The Terminal/Language Selection Menu also allows you to specify the native language

with which the forms ﬁle will be used. See "Setting the Language ID Numbers", Section 8,

for more information.

The options available on the Terminal/Language Selection Menu are also available using

FORMSPEC in batch mode. (See Section 7, for more information.)

Figure 3-31. Terminal/Language Selection Menu

Fields

Select (X) the terminals

The choices are:

HP264X Family Specify an X for HP 264X terminals; specify a Y for HP

264X terminals with function key labeling.