High-Level Screen Management Intrinsic Library Reference Manual (32424-90002)

D- 1
Appendix D Terminals Supported by HI-LI
This appendix contains information about those terminals that are
supported by the Hi-Li intrinsics, and discusses how Hi-Li uses their
various features. In addition, sections about terminal buffer
configuration and how to recover from unexpected program interruptions
are provided. Refer to this appendix if you have any terminal dependent
questions as you develop your application.
Supported Terminals
Hi-Li supports the following terminals:
HP 150 HP 2392A HP 2622A
HP 2393A HP 2623A
HP 2382A HP 2394A HP 2624A
HP 2397A HP 2624B
HP 2625A
HP 2626A
HP 2627A
HP 2628A
For information about the terminal features that Hi-Li can use, see
"Supported Features" in this appendix.
The HP 239X and HP 150 Terminals
You can run Hi-Li on the HP 239X and HP 150 terminals without specifying
HP 262X or HP 239X on the FORMSPEC Terminal/Language Selection Menu
except for special cases that are documented below.
To use the X.25 block mode via the PAD interface that is available on all
HP 239X and HP 150 terminals, the transmit and receive pacing must be set
correctly and the terminal must be strapped correctly. (The HP 239X and
HP 150 terminals will always have the correct ROMS installed). You must
also specify the correct terminal type when you log on to the terminal.
For complete information about using the X.25 block mode feature, see
the
DSN/X.25 HP 3000 Reference Manual (Part No. 32191-90001)
The HP 150 Terminal. To use the security display enhancement feature
for this terminal, you must specify the HP 262X or HP 239X family of