DCE for the HP e3000 (B3821-90002)

Configuring DCE Cells
Using the DCE Configuration Options
Chapter 3
32
2. Select “1. Initial Cell Configuration” from the DCE Configuration Menu, the Initial Cell
Configuration menu as shown in Figure 3-3 is displayed:
Figure 3-3 Initial Cell Configuration
3. Select “1. Security Server” from the Initial Cell Configuration menu.
If you are re-configuring a cell, answer “Y” to the following question shown in Figure
3-4 (this is always a safe answer).
Figure 3-4 Reconfiguring Question
If this is your first cell configuration, or if you have previously run REMOVE, answer
“n” to the question displayed.
4. Enter a cell name, keyseed, cell administrator’s principal name, and the principal’s
password as shown in Figure 3-5.
Figure 3-5 Entering Information
Progress messages are displayed from dce_config and other programs it invokes.
Common messages displayed include “password must be changed” (from the dce_login)
and “bye” (from rgy_edit), these are not errors or warnings.
Initial Cell Configuration
1. Security Server
2. Initial CDS Server
98. Return to previous menu
99. EXIT
selection:
... remove all remnants of previous DCE configurations? Y
... enter the name of your cell: my_cell_name
... enter keyseed for initial database master key: <anykey>
...Cell Administrator’s principal name: cell_admin
...password for the Cell Administrator: password
Re-enter desired password: password