DCE for the HP e3000 (B3821-90002)

Chapter 2
23
2 Installing DCE/3000 Software
This section defines the hardware/software requirements, media, preinstallation
planning, account structure changes, and the basic installation procedure required for
this release of DCE/3000.
Hardware and Software Requirements
Any system that you want to make a member of a DCE cell must meet certain hardware
and software requirements. The system requirements are:
System Type Any HP 3000 (Series 900) system.
Operating System The system that you want to install DCE/3000 on
must be running on MPE/iX release C.50.02
(Express 2, MPE/iX 5.0 push (C.50.02)).
Disk Space A minimum of 300,000 sectors of disc space are
required to install the DCE/3000 software.
If the system that you are installing on is to be
configured as a DCE/3000 client, a minimum of
50 Mb free space is required on the system volume
set.
If the system that you are installing on is to be
configured as a DCE/3000 server, a minimum of
100 Mb free space is required on the system volume
set.
Memory A minimum of 64 Mb of memory is recommended.
Network Dependencies You must have the HP NS Transport product
installed.