Customizing Terminal and Printer Type Files with the Workstation Configurator (32022-90031)

57
A Error Messages
The error messages listed in this appendix can occur while entering
data for a terminal type or printer type file. Messages are displayed in
inverse video on the bottom line of the screen. If the error(s) are related
to a field (or fields) on the screen, the fields are highlighted in full
bright, inverse video. If more than one field contains an error, only the
error message for the first highlighted field is displayed.
MESSAGE: Character already has other function.
CAUSE: The character entered has been defined elsewhere to have a
different special meaning. Each character can have only one special
function.
ACTION: Choose a different character for this special function, or
release this character for use by selecting a different character for the
other special function.
MESSAGE: Character value out of range.
CAUSE: The character input was out of the range of characters allowed
for that function.
ACTION: Input a character within the range.
MESSAGE: File is damaged; checksum error.
CAUSE: The file has been damaged so that the checksum is no longer
valid. The utility still reads the data from the file into the work area,
and when saving the data back to the file, a correct checksum is
generated.
ACTION: Press the
[Enter] key again to go to the form selected. Verify
the data on the screen.
MESSAGE: File is not a valid VFC file.
CAUSE: The file name specified is not a valid VFC file.
ACTION: Specify a file which is a VFC file.
MESSAGE: File is not a valid terminal type file.
CAUSE: The file specified is not a valid terminal type file.
ACTION: Specify a file which is a valid terminal type file.
MESSAGE: Invalid file name.
CAUSE: The file name specified does not meet the requirements for an
HP 3000 file name. It might be because the name starts with a
non-alphabetic character or contains non-alphanumeric characters.
ACTION: Enter a valid file name.
MESSAGE: File converted to MPE/iX format.