Customizing Terminal and Printer Type Files with the Workstation Configurator (32022-90031)

44 Chapter 4
Workstation Configurator — Screen and Field Definition
Convert MPE V Termtype
Convert MPE V Termtype
The Convert MPE V Termtype screen is the second Workstation
Configurator screen. To select this screen, enter X in the Go to form
field on the Main Menu screen and press the
[Enter] key. The Flow
Control screen shown in Figure 4-2 is then displayed.
Figure 4-2 Flow Control Screen
Fields
The Convert MPE V Termtype screen lists only one field.
Convert MPE V termtype file to MPE/iX format (Y/N). Use
this field to convert an MPE V termtype file to MPE/iX format.
NOTE After the termtype file has been converted to MPE/iX format, the file
cannot be ported back to HP 3000 MPE V systems. Additionally, when
termtype files are converted from MPE V to MPE/iX format, the
termtype files might not function as they did on the MPE V system.
Refer to the Asynchronous Serial Communications Programmer’s
Reference Manual for information on the differences between MPE V
and MPE/iX.