Customizing Terminal and Printer Type Files with the Workstation Configurator (32022-90031)

Chapter 2 33
Modifying a Terminal or Printer Type File
Step 8: Defining Vertical Format Control (VFC)
1. Press the [Tab] key to move the cursor to the Is VFC defined for
the device (Y,N) field. Up to 16 VFC channels can be configured.
Each channel performs a standard function such as “skip to top of
next page” or “skip one line.”
2. Type N if VFC channels are not required for this printer.
3. Type Y if VFC channels are required for this printer. Verify that the
cursor is in the String field.
4. Enter the VFC strings. A maximum of 16 characters can be entered,
per string. Remember to surround each string with quotes.
After the data has been entered on this screen, press the Save Data
[F1] function key and the Exit [F8] function key to leave Workstation
Configurator.