Customizing Terminal and Printer Type Files with the Workstation Configurator (32022-90031)

20 Chapter 2
Modifying a Terminal or Printer Type File
Step 1: Starting Workstation Configurator
Step 1: Starting Workstation Configurator
Workstation Configurator is initiated by typing :RUN
TTUTIL.PUB.SYS at the MPE/iX prompt (:) and pressing the
[Return]
key. System operator (OP) and privilege mode (PM) capabilities are
required to run this program.
On each subsequent screen, modify the fields that appear in inverse
video. Information can be entered only in these areas, since the rest of
the screen is protected against modifications. Refer to Appendix B,
“Control Character Mnemonics,” for a list of the mnemonics that can be
entered into the fields that appear in inverse video.
Some fields will list default values. Use these values if they are
acceptable, or enter new values and data specific to the terminal or
printer type file being created.