Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Appendix A 203
Using NMMGR in Maintenance Mode
Using Maintenance Mode
Running Maintenance Mode from a Batch Job
You can also access maintenance mode directly from a batch job by
running NMMGR within a job stream or by running NMMGR with a
file equation for the formal designator NMMGRCMD set to a command
file. An example of such an equation is:
:FILE NMMGRCMD=CMDFILE
Command input is echoed to $STDLIST if you are running NMMGR
from within a job stream or when the input is read from a command
file.
You can create a command file using any editor that is capable of
generating ASCII output. Blank command lines may be entered freely.