Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 8 163
Additional DTC Configuration
Tuning Your DTC
AFCP Timer
Set 6 MPE XL release 2.1 timer mode. This is appropriate for
use with HP 3000 MPE XL FOS release 2.1.
TCP Timer
Set 1 Normal timer mode. For local transaction processing
applications and Telnet connections on local LAN.
TCP Timer
Set 2 Bridge timer mode. Same mode as Set 1 but with
bridges. Suitable for LANs with moderate delays.
TCP Timer
Set 3 Router/X.25 timer mode. Same mode as Set 1 but with
routers or X.25. Suitable for LANs with longer delays.
TCP Timer
Set 4 High data loss timer mode. Suitable for networks with
high data losses.
TCP Timer
Set 5 Heavy traffic timer mode. Suitable for extended
switching applications on local LAN or with bridges
where there is heavy traffic.
Management Timer
Set 1 Normal traffic mode. This is appropriate in a LAN
environment with normal traffic
Management Timer
Set 2 Busy LAN mode. This is appropriate in a LAN
environment with busy traffic.