Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 7 145
Terminal and Printer Profiles
Host Profile Screen (Host-Based)
Host Profile Screen (Host-Based)
Figure 7-10 displays the new Host Profile screen. Use this screen to
configure host ports for back-to-back.
Path name: DTS.PROFILE.profname
Figure 7-10 Host Profile Screen
Review the profile settings on the screen. Use the
[Tab] key to move
from field to field. Make changes as needed by typing over the current
values. When you have made the desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed information about each
field on the screen.
Press the [Prior Screen] key to return to the Profile Selection screen.
Fields Host name Names the port. Field can be a node name up to 16
characters long or an IP address in the format
xxx.xxx.xxx.xxx. If a node name is entered, the
domain and organization names from the DTC node
name will be taken to form a fully-qualified host node
name. Also, if a node name is entered, the IP address of
the DTC configured with this host port must be entered
in the “DTC IP Address” field on the DTC
Configuration screen (Figure 5-5 displays the
DTC 72MX Configuration screen as an example).