Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

144 Chapter7
Terminal and Printer Profiles
PAD Printer Profile (Host-Based)
Customizing Terminal and Printer Type Files with
Workstation Configurator for more information on
TTUTIL.PUB.SYS.
Record
width The number of characters for each record. For HP
terminals, the record width is usually 132 (the width of
the line).
Initially
spooled? Specifies whether the printer will be initially spooled.
NLIO
device? Specifies whether native language devices will be used.
PAD test
requested? Specifies whether the DTC will set and read several
X.29 parameters at connection establishment time to
determine the PAD’s behavior.
Send initial
profile? Specifies whether at connection establishment, the
PAD is set to default X.3 printer parameter values.
X.3 setting
requested? Specifies whether changes to X.3 parameters may be
made after connection establishment.
Device class
names Device classes provide a means of accessing devices
associated with a profile. Each device class name is up
to eight alphanumeric characters beginning with a
letter.
Up to 450 device class names may be used for a printer
profile; the total number of supported, configured
device classes defined in all profiles is 2000. Use the
[Go To CLASSES] key to go to an Additional Device
Class Names screen for entering additional device class
names.
NOTE If you are changing profile characteristics, you can see which ldevs and
DTCs will be affected by the change by pressing the
[Assoc Ldevs]
function key on the profile screen corresponding to the profile you are
changing. After pressing this key, you will see a list of all ldevs using
this profile in the DTCs configured in DTS.