Configuring and Managing MPE/iX Internet Services (MPE/iX 6.0)

96 Chapter 7
Samba/iX Services
Samba/iX Configuration File Options
Default: 5000 (in kilobytes)
log file The log file parameter allows you to specify the
pathname of log file used by SMBD and NMBD
processes.
Example: log file =
/usr/local/samba/var/log.smb
debug level The debug level parameter allows the debug logging
level to be specified in the Samba/iX configuration file.
This option defines the level of trace messages that you
want to log into the logfile.
The typical range of the debug level can be from 0 to 5.
Large values cause more detailed information to be
logged. Most of these debug levels exist to help users to
debug the server activity.
Example: debug level = 3
Default: debug level = 0
Login/Logout Commands
preexec The preexec parameter allows you to specify a
command to be run whenever the service is connected.
Example: callci /usr/local/samba/lib/tellop
tcon %S %u %m %I
Generates the following example output to the console:
9:41 #J36/50/FROM/MGR.SAMBA/tcon on IPC$ by
MGR.SAMBA from rkm-nt
postexec The postexec parameter allows you to specify a
command to be run whenever the service is
disconnected.
Example: callci /usr/local/samba/lib/tellop
tdis %S %u %m %I
Generates the following example output to the console:
9:41 #J36/70/FROM/MGR.SAMBA/tdis on IPC$by
MGR.SAMBA from rkm-nt
Global Printer Service Options
The global printer service options allows you to specify the location of
the “printcap”, printer command parameter used by Samba/iX.
The following global printer configuration options are supported for use
by HP: