Communicator e3000 MPE/iX Release 6.5 (Non-Platform Software Release C.65.00 (30216-90291)

Chapter 4 119
Data Center Management
HP SureStore E Disk Array XP256
— Only RAID 1 is support for LDEV 1.
— Microcode down-loading, online memory replacements and disk adapter
replacements must be performed with no jobs or sessions logged on.
— LDEV 1 capacity limited to 4 Gbytes (due to NIO IODC limits).
Support on MPE/iX has the following restrictions:
• No logging to the host of any vendor unique error codes. These codes are used to identify
any hardware component (FRU) that has failed. For example, the failure of a fan inside
the device would be reported as a FRU error.
• No predictive support.
• SYSGEN product ID is “HPDARRAY”.
• XP256 microcode revision level B++(rev 36) or later is required. Host mode table should
be set to 08.
• Target address support only (Multi- LUN support available on request)
An additional requirement for support is that each XP256 will have a telephone modem
connected for remote access. Normally, the XP256 will call HP support when it detects any
errors. For information on support, see the HP support plan.