Asynchronous Serial Communications Programmer's Reference Manual (32022-90052)

290 AppendixA
Comparing MPE/iX Systems to MPE V Systems
Terminal Types and Printer Types
Terminal Types and Printer Types
The following terminal types files are supported on the ATP and ADCC
terminal/printer controllers with MPE V T-MIT or later (MPE V version
G.01.00 or later):
• 6, 9, 10, 12, 13, 15, 16, 18, 19, 20, 21, 22, TTPCL18, TTPCL19,
TTPCL22, and TTPCL26.
DTS on MPE/iX computers supports three terminal types and four
printer types:
• Terminal type 10.
• Terminal type 18.
• Terminal type 24.
• Printer type 18.
• Printer type 21.
• Printer type 22.
• Printer type 26.
Table A-1 and Table A-2 provide an introduction to the MPE/iX
terminal types and printer types by comparing them to the MPE V
terminal types that are the most similar. See Table A-1 for the terminal
types that apply to terminals, and Table A-2 for the MPE V terminal
types and MPE/iX printer types that apply to printers.
Table A-1 MPE/iX Terminal Types Overview
MPE/iX
Terminal Type
SimilarMPE V
Terminal Type
Differences
10 10 Enhanced XON/XOFF protocol on MPE/iX. No ENQ/ACK
protocol on MPE/iX.
18 18 Enhanced XON/XOFF protocol on MPE/iX.
24 24 For terminal devices connected via PAD.