Asynchronous Serial Communications Programmer's Reference Manual (32022-90052)

206 Chapter8
Intrinsics Reference
FDEVICECONTROL
8 R Obtain the time used for completion of the last read.
9 R/W Set parity generation and checking on or off.
10 R/W Set type of parity.
11 R/W Set parity generation and checking on or off.
12 R/W Set type of parity.
14 R/W Set line deletion response.
15 R/W Set transparent editing mode.
26 R/W Device XON/XOFF enable.
27 R/W Set XOFF timer value.
28 R Block mode types supported.
29 R/W Define block mode alert character.
30 R/W Define block mode trigger character.
32 R/W Define read trigger character.
36 R/W Define backspace character.
37 R/W Define cancel in character.
39 R/W Define Type 1 EOR character.
40 R/W Define Type 2 EOR character (AEOR).
41 R/W Define subsystem break character.
51 R/W Set typeahead mode.
52 R/W Form feed allowed in output data.
53 R/W Define form feed replacement character.
55 R/W Select backspace response action.
56 R/W Specify data bits per character.
57 R Obtain subsystem break character.
60 R/W Flush typeahead buffer.
61 R/W Bypass typeahead buffer.
62 R/W Quiesce I/O.
63 R/W Single Echo Typeahead Mode.
64 R/W Ignore Parity Error on Input Mode.
65 R/W Inter-Byte Timer
parm1
Value
Access
Allowed
Device Control Operation