APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Chapter 4 95
APPC Subsystem Configuration
Configuring the APPC Subsystem
must match the SRCVPAC parameter of the MODEENT
macro in the Logmode Table. For AS/400
communication, this must match the INPACING value
in the Mode Description on the AS/400.
Default: 7
Maximum Pacing Window (Receive)
Required. The maximum number of RUs the remote
LU can send before it must receive a response from the
local LU. For IBM mainframe communication, this
must match the
SSNDPAC parameter of the MODEENT
macro in the Logmode Table. For AS/400
communication, this must match the OUTPACING value
in the Mode Description on the AS/400.
Default: 7
APPC: Select Transaction Program Screen
Any transaction programs that will call the MCGetAllocate intrinsic to
accept allocate requests from remote TPs must be configured in the
“APPC: Select Transaction Program” screen, shown in Figure 4-13. The
information needed to run each remotely initiated local TP is configured
in the “APPC: Transaction Program Data” screen, which you reach by
pressing
[f5] (Add) or [f6] (Modify).
Figure 4-13 Select Transaction Program Screen