APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Chapter 2 33
Interactive Control Operator Commands
APPCCONTROL PERFORMANCE
Examples
In this example, the APPCCONTROL PERFORMANCE command was issued
for the independent session type SESS1. Two sessions of session type
SESS1 are active on the independent LU INDLU1.
:APPCCONTROL PERFORMANCE;STYPE=SESS1
Current Time : FRI, JUN 20, 1990, 4:36 AM
Subsystem Started : FRI, JUN 20, 1990, 1:50 AM
Duration : 2 hours 46 minutes 39 seconds
TPs Started per Subsystem = 26
SESS1 , LU = INDLU1 , NODE = SNANODE , SID = 6612
Session Started : FRI, JUN 20, 1990, 3:37 AM
Duration : 59 minutes 2 seconds
Bytes Sent = 0
Bytes Received = 5
RUs Sent = 0
RUs Received = 1
Negative Responses Sent = 0
Negative Responses Received = 0
Avg. Remote Response Time (msec) = 0
Avg. CONFIRM Time (msec) = 0
Conversations Started = 0
Avg. bytes per Conversation = 0
Avg. Conversation Time (sec) = 0
SESS1 , LU = INDLU1 , NODE = SNANODE , SID = 7534
Session Started : FRI, JUN 20, 1990, 3:40 AM
Duration : 43 minutes 3 seconds
Bytes Sent = 0
Bytes Received = 34
RUs Sent = 0
RUs Received = 1
Negative Responses Sent = 0
Negative Responses Received = 0
Avg. Remote Response Time (msec) = 0
Avg. CONFIRM Time (msec) = 0
Conversations Started = 0
Avg. bytes per Conversation = 0
Avg. Conversation Time (sec) = 0
In this example, the APPCCONTROL PERFORMANCE command was issued
for an individual active session (session ID 2298).
:APPCCONTROL PERFORMANCE;SID=2298
Current Time : FRI, JUN 20, 1990, 5:36 AM
Subsystem Started : FRI, JUN 20, 1990, 1:50 AM
Duration : 2 hours 46 minutes 39 seconds
TPs Started per Subsystem = 26