APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Chapter 2 31
Interactive Control Operator Commands
APPCCONTROL PERFORMANCE
APPCCONTROL PERFORMANCE
Displays session statistics and performance-related data, if the
gathering of performance statistics has been enabled.
Syntax
APPCCONTROL PERF[ORMANCE]
[;STYPE= Session Type Name ]
[;SID= Session ID ]
Parameters
Session Type Name
An active session type name. Performance statistics are
displayed for all active sessions of the session type
specified. The name you specify must be configured in
the APPC subsystem configuration file. See Chapter 4 ,
“APPC Subsystem Configuration,” of this manual for
more information on configuring session type names.
Default: All active session type names.
Session ID
The identification number of the session for which you
are requesting performance data. You can obtain
session ID numbers by issuing the APPCCONTROL
STATUS command, described later in this chapter.
Description
This command displays session performance statistics for the session
type or session specified. If no session type or session ID is specified,
statistics will be displayed for all active sessions.
If APPC subsystem logging is configured (through the LOGGING
branch of NMMGR), the same types of statistics that APPCCONTROL
PERFORMANCE displays will be logged whenever an APPC session is
brought down, locally or remotely.
NOTE The APPCCONTROL PERFORMANCE command does not write performance
data to the log file. If APPC subsystem logging is configured and
performance statistics gathering is enabled, performance data is
written to the log file whenever a session is brought down.
Executing the APPCCONTROL PERFORMANCE command will not interrupt
the sessions for which statistics are being gathered.