APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

28 Chapter2
Interactive Control Operator Commands
Table 2-1 lists the APPC subsystem control operator commands.
Table 2-1 Control Operator Commands
APPCCONTROL DUMP
Dumps APPC subsystem internal data structures to dump
file APPCDPxx.APPC.SYS.
APPCCONTROL HELP
Displays help text for APPCCONTROL commands.
APPCCONTROL PERFORMANCE
Displays session statistics and performance-related data, if
statistics gathering is enabled.
APPCCONTROL PERFORMANCEOFF
Disables the gathering of APPC subsystem performance
statistics.
APPCCONTROL PERFORMANCEON Enables the gathering of APPC subsystem performance
statistics during run time.
APPCCONTROL SESSIONS
Controls the number of active APPC sessions of a specified
APPC session type.
APPCCONTROL START
Activates the APPC subsystem and all APPC sessions
configured for automatic activation.
APPCCONTROL STATUS
Displays the status of the APPC subsystem.
APPCCONTROL STOP Deactivates all APPC sessions, writes out performance data
to the log file (if statistics gathering is enabled and logging is
configured), and brings down the APPC subsystem.
APPCCONTROL STOPSESSION
Deactivates an APPC session for a specified APPC session
type.
APPCCONTROL TRACEOFF
Disables APPC subsystem internal state tracing.
APPCCONTROL TRACEON
Enables APPC subsystem internal state tracing.
APPCCONTROL VERSION
Displays software module version information for the APPC
subsystem and LU 6.2 products.