APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

218 AppendixB
Sample Configuration
HP 3000 Configuration
APPC: Select Mode Type Screen
Figure B-32 shows the “APPC: Select Mode Type” screen. The mode
type MODE1, used by all the independent LU session types in this
example configuration, is the only mode type configured here. The data
for mode type MODE1 is configured in the “APPC: Mode Type Data”
screen, shown in figure B-17. The mode type MODE0, used by the
dependent LU session type in this example configuration, is a
predefined default mode on the HP 3000 and does not appear in the
APPC: Select Mode Type” screen.
The Mode Name for a session type on the HP 3000 must match the mode
name configured for the remote LU on the IBM system. The Mode Name
configured here matches the MODE in the Device Description on the
AS/400.
Figure B-32 Example Select Mode Type Screen