APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

204 AppendixB
Sample Configuration
HP 3000 Configuration
APPC: Network ID Data Screen
If your HP 3000 will operate as a Type 2.1 node, you must configure the
identifier for your local network in the “APPC: Network ID Data”
screen. Chapter Figure B-18, “Example Network ID Data Screen.”
shows the “APPC: Network ID Data” screen for the example
configuration illustrated in this appendix.
The Local Network ID matches the RMTNETID configured in the Device
Description on the AS/400.
Figure B-18 Example Network ID Data Screen