APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 179
Messages
Configuration Messages
13 MESSAGE: Path : APPC.SESSION
At least one Session Type must be configured. (APPCVALERR 13)
CAUSE: You have attempted to validate the APPC subsystem
configuration file without configuring any session types.
ACTION: Configure at least one session type before validating the
configuration file.
14 MESSAGE: Path : APPC.SESSION.!
No data is configured for this Session Type. (APPCVALERR 14)
CAUSE: A session type was configured in the APPC: Select Session Type
screen, but no data was configured for it in the APPC: Independent or
Dependent LU Session Type Data screen.
ACTION: Configure the data for the specified session type.
15 MESSAGE: Paths : APPC.SESSION.!, APPC.SESSION.!
Local LU Name “!” is not unique. It can not be configured for both
SNA Node “!” and SNA Node “!”. (APPCVALERR 15)
CAUSE: The same local LU is configured on two different SNA Nodes
(PUs).
ACTION: Correct the SNA Node configuration so that each local LU is
configured on exactly one SNA Node.
16 MESSAGE: Paths : APPC.SESSION.!, APPC.SESSION.!
These Independent Session Types have the same triple (Local LU,
Mode, Remote LU). (APPCVALERR 16)
CAUSE: Duplicate independent LU session types have been configured.
ACTION: Delete one of the duplicate session types, or modify one to use
a different Local LU, Mode Type, or Remote LU.
17 MESSAGE: Paths : APPC.SESSION.!, APPC.SESSION.!
A single Local LU — Remote LU pair can not support both single and
parallel sessions. (APPCVALERR 17)
CAUSE: Two independent LU session types have been configured using
the same Local LU and Remote LU; one uses a single session and one
uses parallel sessions.
ACTION: Configure a different Local LU for one of the session types, or
modify one session type so that both use single sessions or both use
parallel sessions.
18 MESSAGE: Path : APPC.SESSION.!
Mode Name “!” is not configured under APPC.MODE.
(APPCVALERR 18)
CAUSE: You have configured a session type that uses an unconfigured
Mode Name.