APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 177
Messages
Configuration Messages
Configuration Messages
This section lists the messages that NMMGR may generate when
validating the APPC portion of HP-IBM configuration.
NOTE During HP-IBM validation, NMMGR attempts to validate all SNA
subsystems. Whenever it finds no configuration data for a particular
subsystem, it generates a warning message. Disregard any warning
messages about subsystems you have not installed on your system.
In the following messages, an exclamation point (!) indicates a value
that the system will provide when the message is generated.
1 MESSAGE: ---> VALIDATION OF APPC SUBSYSTEM STARTED <---
CAUSE: NMMGR has started to validate the APPC subsystem portion of
the configuration file.
ACTION: No action required.
2 MESSAGE: ---> VALIDATION OF APPC SUBSYSTEM FINISHED <---
CAUSE: NMMGR has finished validating the APPC subsystem portion
of the configuration file.
ACTION: No action required.
3 MESSAGE: INTERNAL ERROR. Get data failed with result code !.
(APPCVALERR 3)
CAUSE: An internal error in NMMGR has occurred.
ACTION: Notify your HP Representative
4 MESSAGE: INTERNAL ERROR. Get path failed with result code !.
(APPCVALERR 4)
CAUSE: An internal error in NMMGR has occurred.
ACTION: Notify your HP Representative.
5 MESSAGE: Configuration file corrupt. Missing APPC Path.
(APPCVALERR 5)
CAUSE: The configuration file you are validating does not contain APPC
path information and cannot be used.
ACTION: Notify your HP Representative.
6 MESSAGE: Configuration file corrupt. Missing APPC Version.
(APPCVALERR 6)
CAUSE: The configuration file you are validating does not contain APPC
version information and cannot be used.