APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

174 AppendixA
Messages
Return Codes
-1040 MESSAGE: Unable to open NM log file
CAUSE: The APPC subsystem is unable to open the Node Management
Log File.
ACTION: Check the logging class configuration in NMMGR.
-1041 MESSAGE: Unable to close NM log file
CAUSE: The APPC subsystem is unable to close the Node Management
Log File.
ACTION: Check the logging class configuration in NMMGR.
-1042 MESSAGE: Unable to open internal trace file
CAUSE: The APPC subsystem is unable to create the internal trace file.
ACTION: Restart the APPC subsystem. If the problem still exists, call
your HP representative.
-1043 MESSAGE: Unable to close internal trace file
CAUSE: The APPC subsystem is unable to close the internal trace file.
ACTION: Restart the APPC subsystem. If the problem still exists, call
your HP representative.
-1046 MESSAGE: Unable to create Resource Manager at subsystem
start-up
CAUSE: Internal error in APPC subsystem.
ACTION: Contact your HP representative.
-1047 MESSAGE: Unable to create control operator TP at subsystem
start-up
CAUSE: Internal error in APPC subsystem.
ACTION: Contact your HP representative.
-1048 MESSAGE: Unable to create CNOS TP at subsystem start-up
CAUSE: Internal error in APPC subsystem.
ACTION: Contact your HP representative.
-1049 MESSAGE: Resource Manager detected error during subsystem
start-up
CAUSE: Internal error in APPC subsystem.
ACTION: Contact your HP representative.
-1050 MESSAGE: COPR TP detected error during subsystem start-up
CAUSE: Internal error in APPC subsystem.
ACTION: Contact your HP representative.