APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

164 AppendixA
Messages
Error Messages
1042 MESSAGE: TRACE FILE OPEN FAILED. (APPCERR 1042)
CAUSE: The APPC subsystem is unable to create the APPC internal
trace file.
ACTION: Restart the APPC subsystem. If the problem still exists, call
your HP representative.
1043 MESSAGE: TRACE FILE CLOSE FAILED. (APPCERR 1043)
CAUSE: The APPC subsystem is unable to close the APPC internal trace
file.
ACTION: Restart the APPC subsystem. If the problem still exists, call
your HP representative.
1044 MESSAGE: UNABLE TO CREATE APPC DUMP FILE.
(APPCERR 1044)
CAUSE: A file could not be created to dump the APPC data structures.
ACTION: Verify that there is enough disk space to build the dump file,
and then retry the command. If the problem still exists, call your
HP representative.
1045 MESSAGE: UNABLE TO OPEN APPC DUMP FILE. (APPCERR 1045)
CAUSE: The APPC dump file could not be opened.
ACTION: Verify that the capabilities for the APPC.SYS group and
account are correct and that there is enough disk space on the system.
Then retry the command. If the problem still exists, call your
HP representative.
1046 MESSAGE: UNABLE TO CREATE RESOURCE MANAGER AT
SUBSYSTEM STARTUP. (APPCERR 1046)
CAUSE: The APPC subsystem detected an error trying to create the
Resource Manager process during subsystem startup.
ACTION: Verify that the program file RM.APPC.SYS exists and that the
capabilities and access privileges for the APPC.SYS group and account
are correct. If the problem still exists, contact your HP representative.
1047 MESSAGE: UNABLE TO CREATE COPR TP AT SUBSYSTEM
STARTUP. (APPCERR 1047)
CAUSE: The APPC subsystem detected an error trying to create the
Control Operator TP process during subsystem startup.
ACTION: Verify that the program file COPRTP.APPC.SYS exists and that
the capabilities and access privileges for the APPC.SYS group and
account are correct. If the problem still exists, contact your
HP representative.