APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

146 AppendixA
Messages
Subsystem Startup Messages
Subsystem Startup Messages
Startup messages are returned by the APPC subsystem when the node
manager issues an APPCCONTROL START command. These messages are
returned to the terminal from which the APPCCONTROL START command
is issued.
Note that these messages are informational only, and no action is
required.
1 MESSAGE: Successful completion.
CAUSE: APPC subsystem activation has begun.
ACTION: None.
2 MESSAGE: APPC: Opening internal trace file — NMTC#### or user
trace file.
CAUSE: The APPC subsystem internal trace file is being opened.
ACTION: None.
3 MESSAGE: APPC: Starting SNA/LINK PU Node
CAUSE: The SNA link is being activated.
ACTION: None.
4 MESSAGE: APPC: Control Operator start-up completed.
CAUSE: APPC subsystem startup by the APPCCONTROL START command
or the APPCStart intrinsic is now completed.
ACTION: None.
6 MESSAGE: APPC: Closing internal trace file — NMTC#### or user
trace file.
CAUSE: APPC subsystem is closing the internal trace file.
ACTION: None.
7 MESSAGE: APPC: Performance tracing is enabled.
CAUSE: APPC subsystem will gather performance data during run
time.
ACTION: None.
8 MESSAGE: APPC: Performance tracing is disabled.
CAUSE: APPC subsystem will not gather performance data during run
time.
ACTION: None.