Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 5 99

Using NMMGR in Maintenance Mode

EXITWARN

Warns that a subsystem needs to be validated before exiting NMMGR.

Syntax

EXITWARN subsystem [ON or OFF]

Parameters

subsystem The name of a conﬁguration subsystem to which

messages will be issued. Currently NETXPORT, DTS,

or IBM is allowed.

ON This is the default and need not be

speciﬁed. It indicates that an exit

message is to be enabled for the

speciﬁed subsystem.

OFF Indicates that an exit message is to be

disabled for the speciﬁed subsystem.

Description

Automatically warns you that validation needs to be performed for the

selected subsystem(s) when you attempt to exit NMMGR. NMMGR will

note that validation is needed whenever a conﬁguration is changed

without being validated. Output is directed to the formal designator

FORMLIST, which defaults to $STDLIST.

If the conﬁguration is not validated, NMMGR will return you back to

screen mode instead of exiting. If you want to exit, use the EXIT

command or press the

[EXIT] function key (on the OPEN screen) again.

By default, exit warning is enabled for the all subsystems.

Example

NMMGR> EXITWARN DTS