Using the Node Management Services (NMS) Utilities (32022-90053)

98 Chapter5
Using NMMGR in Maintenance Mode
EXITVALIDATE
EXITVALIDATE
Validates a subsystem’s configuration, if needed, upon exit from
NMMGR.
Syntax EXITVALIDATE subsystem [ON or OFF]
Parameters subsystem The name of a configuration subsystem that is to be
validated. Currently NETXPORT, DTS, or IBM is
allowed.
ON This is the default and need not be
specified. It indicates that exit
validation is to be enabled for the
specified subsystem.
OFF Indicates that exit validation is to be
disabled for the specified subsystem.
Description Automatically validates the selected configuration (if needed) when you
attempt to exit NMMGR. NMMGR will note that validation is needed
whenever a configuration is changed without being validated. Output is
directed to the formal designator FORMLIST, which defaults to
$STDLIST.
If the configuration is not valid NMMGR will return you back to screen
mode instead of exiting. If you want to exit, use the EXIT command or
press the
[EXIT] function key (on the OPEN screen) again.
By default, exit validation is enabled for the DTS subsystem.
Example NMMGR> EXITVALIDATE DTS