Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 5 81
Using NMMGR in Maintenance Mode
ADDLDEV
ADDLDEV
Adds LDEVs to a DTC card.
Syntax {dtcname}
ADDLDEV {dtc-nodename} [filename]
{station-address}
Parameters dtcname The NMMGR nametag for the DTC being accessed. The
nametag is the last name in the pathname of the DTC.
For example, the dtcname is DTC01 in the pathname
DTS.DTC.SELECT.DTC01. The dtcname in a one to
eight character alphanumeric string.
dtc-nodename The nodename of the DTC that has been configured at
the DTC nametag path. The name must conform to the
NODENAME.ORGANIZATION.DOMAIN format. The name
is a five to fifty character alphanumeric string.
station- address
The hexadecimal station of the DTC being accessed.
filename A text file that contains the LDEVs to be added or
purged. The file name’s format is:
filename[.groupname[.accountname]]
A file lockword may not be specified. The contents of the
file must be formatted as described here.
Description This command adds LDEVs to the cards in the DTC’s configuration.
The first DTC found that matches the selection criteria will be operated
on. For example, this could occur if more than one DTC is configured
with the same station-address.
LDEVs for one of more cards can be entered on each invocation of this
command. If the filename is not specified you will be prompted with the
ADDLDEV> prompt. The format for each entry depends on the card type.
The formats for these card types are as follows:
• For direct connect or modem cards:
LDEV[,] cardno[,] portno[,] profilename[,]
• For X.25 PAD cards:
LDEV[,] cardno[,] profilename[,] device-name[,]
x25address[,] [CUG] [;]
All text following the number sign “#” will be interpreted as a comment.