Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 5 77
Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Maintenance Mode Commands
Table 5-1 lists the NMMGR maintenance mode commands and the
actions they perform. Each of these commands is described in detail
later in this chapter.
Table 5-1 NMMGR Maintenance Mode Commands
Command Action
:MPECommand
Executes MPECommand. MPECommand must be a
programmatically executable MPE command.
ADDCONF
Adds subtree of empty records to the configuration
file.
ADDLDEV
Adds LDEVs to a DTC card.
ADDLU
Adds LUs to the SNA node transport screen.
ADDNODE
Adds or updates a node in the current network
directory.
ADDVC
Adds a virtual circuit address key to the network
directory and to the configuration file.
CARDCONF
Sets the current DTC card number for the
READALLCONF, READCONF, UPDATECONF, and
WRITECONF commands.
COMPRESSCONF
Compresses or expands the current configuration
file.
CONTINUE
Prevents NMMGR from terminating in a job
because of a maintenance mode error
COPYCONF
Copies a configuration subtree.
DELETECONF
Deletes a subtree from the current configuration
file.
DELETENODE
Deletes an entry from the network directory.
EXIT
Exits from maintenance mode.
EXITVALIDATE
Validates a subsystem’s configuration, if needed,
when exiting from NMMGR.
EXITWARN
Warns the user that a subsystem needs to be
validated before exiting NMMGR.
EXPANDDIR
Increases the capacity of a network directory file.
HELP
Calls up the help function.