Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 4 61
Using NMMGR Utility Screens
Output Configuration File Screen
Print Summary
The [Print Summary] key allows you to print all the configuration data for
the chosen subsystem on the Output Configuration File menu. This is a
listing of information that is contained in your configuration file. By
default, output is sent to the device LP. You can redirect the output by
using a file equation for the formal file designator FORMLIST.
To print a critical summary, choose the number corresponding to the
subsystem for which you want the report. Enter the number in the field
to the right of “Print Summary” and press the
[Print Summary] key. (The
numbers for the subsystems are the same as those that you would use
to select subsystems for the
[Print Data] key.)
The example shown in Figure 4-5 is the first part of a critical summary
for a full-gateway node that has been configured with a point-to-point
(router) network interface (NI) and a LAN NI.
Figure 4-5 Sample Page of Critical Summary Report
NM Configuration Manager 32098-20016 V.uu.ff (C) Hewlett Packard Co. 1990
CRITICAL SUMMARY - NETXPORT CONFIGURATION
TUE, APR 10, 1990, 11:07 AM
CONFIGURATION FILE NAME: NMCONFIG.PUB.SYS
NODE NAME: FLAGSTAFF.ROUTE66.USA
TRANSPORT GLOBAL CONFIGURATION:
name Search Method: 1. Probe
2. Probe Proxy
3. Network Directory
Maximum Directly Connected Nodes: 1024
Maximum Outbound Destinations: 360
Maximum Inbound Destinations: 360
PACKET EXCHANGE PROTOCOL (PXP) CONFIGURATION:
Retransmission Interval (Secs): 10
Maximum Retransmissions Per Request: 4
TRANSMISSION CONTROL PROTOCOL (TCP) CONFIGURATION:
Maximum Numbre of Connections: 128
Retransmission Interval Upper Bound (Secs): 180
Retransmission Interval Lower Bound (Secs): 4
Initial Retransmission Interval: 5
Maximum Number of Retransmissions: 4
Connection Assurance Interval: 600
Maximum Connection Assurance Retransmissions: 4
.
.
.