Using the Node Management Services (NMS) Utilities (32022-90053)
Appendix A 295
NMS Error Messages
FMT Error Messages
MESSAGE: SUBSYSxxTRACEFORMAT CM STUB ERROR (nnn,sss)
FROM HPSWTONMNAME
UNABLE TO CALL NM TRACE FORMATTER ROUTINE (FMTERR 999)
FMTERR 999 CAUSE: The CM Stub could not call the named NM WAN Trace
Formatter routine for subsystem “xx” in the system library
XL.PUB.SYS.
ACTION: Incorrect software installation to run Native-Mode Trace
Formatters. This could also be CAUSEd by incorrect privilege levels.
The SWITCH error number is “nnn” and the subsystem reporting the
error is “sss”. Call your HP representative.
MESSAGE: ALL overrides other selections entered at the same time
4024 CAUSE: Among the filter-set numbers you entered, you also specified
the number for ALL. This is a warning.
ACTION: Check your input. Unless you mistyped one of the other
set-numbers, it does not make sense to specify ALL along with other
items, beCAUSE ALL would include the other sets anyway. To retype
your input after this warning you must first return to the filter-set
selection menu.
MESSAGE: Warning: Errors always print; for Errors only don’t include
other sets
4025 CAUSE: Among the filter-set numbers you entered, you also specified
the number for ERRORS-ONLY. This is a warning.
ACTION: Check your input. Unless you mistyped one of the other
set-numbers, it does not make sense to specify ERRORS-ONLY along
with other items, beCAUSE including the other items would defeat the
meaning of ERRORS-ONLY. To retype your input after this warning
you must first return to the filter-set selection menu.
MESSAGE: Input truncated to 80 characters
4026 CAUSE: The input file to the user menu was given more than
80 characters of input, but the menu can only accept 80. This is a
warning.
ACTION: If the extra characters are just extra blanks, ignore this
message or reduce the width of the input file. But if the extra
characters are non-blank, you must edit the input file, finding a way to
reduce the width of the input data to no more than 80 characters.
MESSAGE: Extra input ignored
4027 CAUSE: Only one number was expected, but you entered more than one,
and the extra number(s) were ignored. This is a warning.
ACTION: Check your input and, if necessary, return to that prompt and
retype the input.