Using the Node Management Services (NMS) Utilities (32022-90053)

280 AppendixA
NMS Error Messages
ND Error Messages
ND Error Messages
NDIERR messages are produced by errors from the Network Directory
intrinsics. In most cases, they are accompanied by other messages
(NMGRERRs or MPE File System errors). You should take the action
recommended for the accompanying messages first.
MESSAGE: Directory file not open. (NDIERR 001)
NDIERR 001 CAUSE: No directory file was opened.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Directory is not open for write access. (NDIERR 002)
NDIERR 002 CAUSE: The currently opened directory was not opened with write
access.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: FLOCK failed — internal error. (NDIERR 003)
NDIERR 003 CAUSE: This is an internal error.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Requires Network Administrator capability. (NDIERR 004)
NDIERR 004 CAUSE: User does not have network Administrator capabilities.
ACTION: Change user capabilities.
MESSAGE: Not enough room in directory for new entry. (NDIERR 006)
NDIERR 006 CAUSE: The directory file is full.
ACTION: Expand the directory file capacity using the NMMGR
maintenance mode EXPANDDIR command.
MESSAGE: FCONTROL/FUNLOCK failed — internal error.
(NDIERR 007)
NDIERR 007 CAUSE: The directory file is full.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Name type invalid; must be 1 (NS node name).
(NDIERR 008)
NDIERR 008 CAUSE: This is an internal error.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Name length invalid for name type. (NDIERR 009)
NDIERR 009 CAUSE: This is an internal error.
ACTION: See “Submitting an SR” at the beginning of this appendix.