Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 277
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
MESSAGE: An error has occurred during NETXPORT CONVERSION.
(NMMGRVERERR 85)
NMMGRVERERR
85
CAUSE: An error occurred during the NETXPORT part of the
conversion process. The actual error is listed in an error message which
should be displayed along with this one.
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
MESSAGE: An error has occurred during LAPB LINK CONVERSION.
(NMMGRVERERR 86)
NMMGRVERERR
86
CAUSE: An error occurred during the LAPB LINK part of the
conversion process. The actual error is listed in an error message which
should be displayed along with this one.
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
MESSAGE: An error has occurred during DTS CONVERSION.
(NMMGRVERERR 87)
NMMGRVERERR
87
CAUSE: An error occurred during the DTS part of the conversion
process. The actual error is listed in an error message which should be
displayed along with this one.
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.